Best Rust Converter
Transform rust into a protective polymer coating with our revolutionary formula. Say goodbye to rust forever.
Transform rust into a protective polymer coating with our revolutionary formula. Say goodbye to rust forever.
Our environmentally friendly water-based formula is non-flammable, has low VOCs, and is easy to clean up with just soap and water.
Chemically converts rust (iron oxide) into a stable, black protective polymeric coating that prevents future rust formation.
Simply brush, roll, or spray onto rusty surfaces. No need for extensive preparation or complete rust removal.
Perfect for automotive frames, equipment, tools, fences, railings, and any ferrous metal surfaces affected by rust.
A little goes a long way. One gallon covers approximately 500 square feet, making it an economical solution for large projects.
Creates a smooth, paintable surface that's perfect as a primer for your topcoat, ensuring long-lasting protection.
Remove loose rust, scale, and flaking paint with a wire brush or sandpaper. You don't need to remove all the rust—just the loose material. Clean the surface to remove dirt, oil, and grease.
Shake the product thoroughly before use. Apply liberally with a brush, roller, or sprayer to the rusty surface. The milky white liquid will begin to react with the rust, turning it dark purple and eventually black.
The formula chemically bonds with the iron oxide (rust), transforming it into a stable, inert compound. This process converts the destructive rust into a protective barrier that prevents oxygen and moisture from reaching the metal.
Allow the product to cure for 24-48 hours, depending on temperature and humidity. The surface will transform into a hard, black protective coating that seals and protects the metal.
For maximum protection, apply an oil-based topcoat after the converter has fully cured. The converted surface serves as an excellent primer for paint, extending the life of your finish.
No, you don't need to remove all the rust. Just remove loose rust, scale, and flaking paint with a wire brush or sandpaper. The converter actually needs some rust to react with. However, you should clean the surface to remove dirt, oil, and grease for best results.
The chemical reaction begins immediately upon application, with the white liquid turning dark purple/blue within 20-30 minutes. Complete curing takes 24-48 hours depending on temperature and humidity. For best results, allow a full 48 hours before applying any topcoat.
Yes, the converted surface serves as an excellent primer for paint. For best results, use an oil-based topcoat after the converter has fully cured (48 hours). Water-based paints are not recommended as they may not adhere properly to the converted surface.
One gallon covers approximately 500 square feet of surface area. However, heavily rusted surfaces may require more product. Many customers report that a little goes a long way, with some large projects like truck frames using less than half a gallon.
The product is water-based and environmentally friendly with low VOCs. However, we recommend using rubber/nitrile gloves during application as it can irritate skin. Work in a well-ventilated area and avoid contact with eyes. The product is non-flammable and cleanup is easy with soap and water.
When properly applied and sealed with an oil-based topcoat, the protection can last for years. Many customers report no rust returning after several years of use. For maximum longevity, we recommend applying a quality topcoat and performing periodic inspections, especially in harsh environments.
Transform your rusty surfaces into protected, paintable surfaces with our professional-grade rust converter. One gallon covers up to 500 square feet and provides years of protection.
